| 期 |
标题 |
文件 |
| 卷 126, 编号 7 (2025) |
ON THE POSSIBILITY OF CREATING HEAT-RESISTANT ALUMINUM DEFORMABLE ALLOYS BASED ON THE Al–Cu–Mn–Ni SYSTEM WITHOUT THE USE OF HARDENING HEAT TREATMENT |
(Rus)
|
|
Belov N., Tsydenov K., Cherkasov S.
|
| 卷 126, 编号 4 (2025) |
Study of microstructure, electrical conductivity and mechanical properties of ingot and thin wires made of new alloy Al–0.27Zr–0.17Si–0.30Er |
(Rus)
|
|
Komelkov A., Nokhrin A., Bobrov A., Sysoev A., Shishulin E., Morozkina E.
|
| 卷 126, 编号 4 (2025) |
Study of mechanical properties and corrosion resistance of ultrafine-grained austenitic chromium-nickel steel produced by rotary swaging |
(Rus)
|
|
Zotov D., Kopylov V., Chegurov M., Nokhrin A., Sysoev A., Chuvil’deev V., Kotkov D.
|
| 卷 126, 编号 4 (2025) |
Assessment of plasticity and damage of material of fuel element shells irradiated with fast neutrons |
(Rus)
|
|
Karagergi R., Portnykh I., Konovalov A., Baranova S., Kozlov A.
|
| 卷 126, 编号 3 (2025) |
Nitriding of the iron-titanium phase: first-principles calculations based on experimental data |
(Rus)
|
|
Kistanov A., Nazarov A., Korznikova E.
|
| 卷 126, 编号 3 (2025) |
Fine structure of pipe steel X70 after long-term operation |
(Rus)
|
|
Tereshchenko N., Yakovleva I., Esiev T.
|
| 卷 126, 编号 3 (2025) |
Model of transient creep for a ferritic-martensitic steel based on the modified θ-projection method |
(Rus)
|
|
Kolotovkina А., Zborovskii V., Leonteva-Smirnova M.
|
| 卷 126, 编号 6 (2025) |
MODEL OF VOID FORMATION ON WEDGE DISCLINATION |
(Rus)
|
|
Perevezentsev V., Kirikov S., Pupynin A.
|
| 卷 126, 编号 5 (2025) |
Study of the structure and properties of aluminum-matrix composites based on technical aluminum, reinforced with multi-walled carbon nanotubes |
(Rus)
|
|
Shirinkina I., Brodova I., Astafyev V., Tolochko B., Kuznetsov V., Zhdanok A., Korotayeva Z., Razorenov S., Savinykh A., Garkucshin G., Shorokhov E.
|
| 卷 126, 编号 1 (2025) |
The evolution of the microstructure of Cr16–Ni19 Steel under irradiation in the low enrichment zone of a fast neutron reactor. Formation and development of radiation porosity |
(Rus)
|
|
Portnykh I., Panchenko V., Ustinov A., Kozlov A.
|
| 卷 126, 编号 1 (2025) |
The evolution of the microstructure of Cr16–Ni19 steel under irradiation in the low enrichment zone of a fast neutron reactor. The effect of neutron irradiation conditions on the structural and phase state |
(Rus)
|
|
Panchenko V., Portnykh I., Ustinov A.
|
| 卷 126, 编号 1 (2025) |
Study of the influence of acoustic fields on the mechanical and technological properties of titanium VT1-0 |
(Rus)
|
|
Remshev E., Vorob’eva G., Olekhver A., Abu Fadda T.
|
| 卷 126, 编号 2 (2025) |
Thermal stability of electrical conductivity and mechanical properties of thin wires from aluminum alloys Al–0.25%Zr–(Si, Er, Hf, Nb) |
(Rus)
|
|
Shadrina I., Bobrov A., Nokhrin A., Berendeev N., Kopylov V., Chuvildeev V., Tabachkova N.
|
| 卷 126, 编号 2 (2025) |
Dislocation structure and an activity of plastic deforming media |
(Rus)
|
|
Zuev L., Barannikova S., Danilov V.
|
| 卷 126, 编号 2 (2025) |
Deuterium retention in the material of welded seam rafm steel EK-181 (Rusfer) |
(Rus)
|
|
Golubeva A., Persianova A., Efimov V., Bobyr N., Chernov V.
|
| 卷 125, 编号 8 (2024) |
Crack resistance of maraging steel at cyclic loading |
(Rus)
|
|
Simonov Y., Simonov M., Kaletina Y., Kaletin A.
|
| 卷 125, 编号 8 (2024) |
Structural studies and convergence scenario for a shell made of Mg–Zn–Zr magnesium alloy |
(Rus)
|
|
Shirinkina I., Brodova I., Astafjev V., Dolgih S., Gaan K., Novoselov V.
|
| 卷 125, 编号 9 (2024) |
Changes in the structure of the Fe–Ni–Ti–C–B composite during hot plastic deformation |
(Rus)
|
|
Pugacheva N., Bykova Т., Kгyuchkov D.
|
| 卷 125, 编号 12 (2024) |
Effect of equal channel angular pressing on the structure and mechanical properties of Al–6Ca–3Ce alloy |
(Rus)
|
|
Andreev V., Barykin M., Karelin R., Komarov V., Naumova E., Rogachev S., Tabachkova N.
|
| 卷 125, 编号 12 (2024) |
Effect of mechanical alloying modes on the microstructure, phase composition and mechanical properties of powder high-entropy Co–Cr–Fe–Ni–Ti alloys |
(Rus)
|
|
Berezin М., Zaitsev А., Romanenko B., Loginov Р.
|
| 卷 125, 编号 12 (2024) |
Investigation of residual stresses in steel plates after shot-impact treatment by high spatial resolution neutron diffraction |
(Rus)
|
|
Karpov I., Em V., Nikolaeva E., Sergeichev I., Voloskov B., Mikula P.
|
| 卷 125, 编号 6 (2024) |
Calculation of the yield strength of polycrystalline materials with a hexagonal close-packed lattice at a given texture |
(Rus)
|
|
Kesarev A.
|
| 卷 125, 编号 6 (2024) |
Microstructure of fracture surfaces after radial compression of annular specimens made of cladding austenitic steel exposed to damaging dose above 100 dpa |
(Rus)
|
|
Karagergi R., Kozlov A., Yarkov V., Pastukhov V., Barsanova S., Churyumova T., Mitrofanova N., Leont’eva-Smirnova M.
|
| 卷 125, 编号 6 (2024) |
Thermal stability of microstructure and properties of ingots and fine wires from Al–Zr alloys |
(Rus)
|
|
Komelkov A., Nokhrin A., Bobrov A., Sysoev A.
|
| 卷 125, 编号 11 (2024) |
Effect of Grain Size on the Hydrogen-Induced Ductility Loss of a Multicomponent CoCrFeMnNi Alloy |
(Rus)
|
|
Astafurova E., Nifontov A.
|
| 卷 125, 编号 11 (2024) |
Effect of Vanadium Concentration on the Structure and Properties of Ti–V Alloys Subjected to High-Pressure Torsion |
(Rus)
|
|
Davdian G., Gornakova A., Straumal B., Orlov V., Afonikova N., Tyurin A., Druzhinin A., Kilmametov A., Sommadossi S.
|
| 卷 125, 编号 11 (2024) |
Thermophysical Properties of High-Strength Low-Alloyed Pipe Steel |
(Rus)
|
|
Urtsev N., Platov S., Shmakov A., Ryzhkov M., Lobanov M.
|
| 卷 125, 编号 11 (2024) |
A multiscale model of creep in steels with account for the microstructure |
(Rus)
|
|
Khromov K., Ryabov V., Kozlov A., Panchenko V.
|
| 卷 125, 编号 5 (2024) |
The effect of vanadium on the performance properties of Al–2.3%V alloy manufactured by 3D printing |
(Rus)
|
|
Shevchenko V., Eselevich D., Popov N., Baklanov M., Vichuzhanin D.
|
| 卷 125, 编号 3 (2024) |
Fatigue Resistance of the Sheets of Heat-Resistant Titanium Alloys |
(Rus)
|
|
Kalienko M., Popov A., Volkov A., Leder M., Zhelnina A.
|
| 卷 125, 编号 2 (2024) |
Initiation of the Shape Memory Effect by Fast Neutron Irradiation |
(Rus)
|
|
Bobrovskii V., Afanasyev S., Voronin V., Kazantsev V., Kataeva N., Parkhomenko V., Proskurnina N., Sagaradze V.
|
| 卷 125, 编号 2 (2024) |
Investigation of the absorption properties of multilayer composites based on ABS-plastic with boron nitride |
(Rus)
|
|
Kovalenko N., Tarnavich V., Chetverikov Y.
|
| 卷 125, 编号 7 (2024) |
Microstructural, mechanical, and tribological characteristics of ceramic reinforced Al/Cu hybrid matrix composites |
(Rus)
|
|
Kaya E., Birgin P.
|
| 卷 124, 编号 12 (2023) |
The Dynamic Properties of Low-Alloyed Copper Alloys with a Submicrocrystalline Structure Obtained by High-Strain-Rate Deformation |
(Rus)
|
|
Abdullina D., Khomskaya I., Razorenov S., Shorokhov E.
|
| 卷 124, 编号 12 (2023) |
Structure, Phase Composition and Mechanical Properties of a High-Strength Steel with Transition Carbide η-Fe2C |
(Rus)
|
|
Borisova Y., Mishnev R., Tkachev E., Kniaziuk T., Gaidar S., Kaibyshev R.
|
| 卷 124, 编号 12 (2023) |
Mechanical Properties of High Entropy Alloys Based on Rare Earth Elements with Yttrium and Scandium |
(Rus)
|
|
Sipatov I., Korolev O., Ignatieva E., Marshuk L., Gelchinskiy B., Rempel A.
|
| 卷 124, 编号 9 (2023) |
STUDY OF LOW-TEMPERATURE THERMOMECHANICAL BEHAVIOR OF THE Ti-18Zr-15Nb SUPERELASTIC ALLOY UNDER DIFFERENT TEMPERATURE-RATE CONDITIONS |
(Rus)
|
|
Derkach M., Sheremetev V., Korotitskiy A., Prokoshkin S.
|
| 卷 124, 编号 9 (2023) |
The influence of Ni on the contributions of the superplastic deformation mechanisms of the Al–Zn–Mg–Cr alloys |
(Rus)
|
|
Yakovtseva O., Postnikova M., Irzhak A., Rofman O., Mikhaylovskaya A.
|
| 卷 124, 编号 8 (2023) |
Evolution of structure and mechanical properties at high temperature tempering of medium carbon microalloyed steel |
(Rus)
|
|
Farber V., Khotinov V., Selivanova O., Ovsyannikov A., Karabanalov M.
|
| 卷 124, 编号 8 (2023) |
On the nucleation of cracks near stress sources with weak singularities |
(Rus)
|
|
Kirikov S., Perevezentsev V., Pupynin A.
|
| 卷 124, 编号 8 (2023) |
MANIFESTATION OF SUPERPLASTICITY AT LOWER TEMPERATURES OF 1565CH ALLOY OF THE Al−Mg SYSTEM IN ULTRAFINE-GRAIN AND NANOSTRUCTURAL STATES |
(Rus)
|
|
Bobruk E., Ramazanov I., Astanin V., Zaripov N., Kazykhanov V., Drits A., Murashkin M., Enikeev N.
|
| 卷 124, 编号 7 (2023) |
Peculiarities of the Behavior of Point Defects under the Optoplastic Effect in Copper |
(Rus)
|
|
Malinskii T., Rogalin V., Shur V., Kuznetsov D.
|
| 卷 124, 编号 7 (2023) |
Structural Evolution of 10% Cr–3% Co Steel Microalloyed
with Re and Cu during Creep Au 923 К |
(Rus)
|
|
Fedoseeva A.
|
| 卷 124, 编号 6 (2023) |
Evolution of the structure, texture and mechanical properties of a cold-swaged austenitic stainless steel during post-deformation annealing |
(Rus)
|
|
Chernichenko R., Panov D., Naumov S., Kudryavtsev E., Mirontsov V., Salishchev G., Pertsev A.
|
| 卷 124, 编号 6 (2023) |
STRUCTURE AND PROPERTIES OF THE Al-Zn-Mg-Cu-Zr-Y(Er) ALLOYS SHEETS DOPED BY MANGANESE |
(Rus)
|
|
Glavatskikh M., Barkov R., Khomutov M., Pozdniakov A.
|
| 卷 124, 编号 6 (2023) |
THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE Al–Mg–Fe–Ni–Zr–Sc ALLOY AFTER MULTIDIRECTIONAL FORGING |
(Rus)
|
|
Kishchik A., Aksenov S., Kishchik M., Demin D., Churyumiv A., Mikhaylovskaya A.
|
| 卷 124, 编号 6 (2023) |
EFFECT OF HIGH PRESSURE TORSION ON STRUCTURE AND MECHANICAL PROPERTIES OF Al–Ca–Cu ALLOY |
(Rus)
|
|
Rogachev S., Naumova E., Tabachkova N., Ten D., Sundeev R., Zadorozhny M.
|
| 卷 124, 编号 5 (2023) |
On the Precipitation of the -Phase {111} Al Plates
in the Al–Cu–Mg Alloy |
(Rus)
|
|
Zuiko I., Gazizov M., Kaibyshev R.
|
| 卷 124, 编号 5 (2023) |
The Effect of Termomechanical Treatment
on the Low-Cyclic Fatigue Behavior in an Al–Cu–Mg–Ag Alloy |
(Rus)
|
|
Gazizov M., Gazizova M., Zuiko I., Kaibyshev R.
|
| 卷 124, 编号 5 (2023) |
A Study of Residual Stresses in Steel Plates Obtained
by Laser Deposition Directly on a Rigid Substrate |
(Rus)
|
|
Rylov S., Ivanov S., Zemlyakov E., Babkin K., Karpov I., Em V.
|
| 卷 124, 编号 4 (2023) |
The Effect of Atomic Interdiffusion at the Al/Сu Interface
in an Al/Сu Composite on Its Mechanical Properties:
Molecular Dynamics |
(Rus)
|
|
Polyakova P., Baimova Y.
|
| 卷 124, 编号 4 (2023) |
Formation of Deformation Bands during Impact Indentation
of an Al–6Mg Alloy |
(Rus)
|
|
Shibkov A., Zolotov A., Denisov A., Gasanov M.
|
| 卷 124, 编号 4 (2023) |
The Effect of TiN Nanoparticles on the Structure and Mechanical Properties of the Porous–Solid Steel Joint Formed
by Laser-Beam Welding |
(Rus)
|
|
Cherepanov A., Drozdov V., Filippov A.
|
| 卷 124, 编号 4 (2023) |
The Effect of Thermodeformation Treatment on the Structure
and Strengthening of the Al–7.1% Zn–2.8% Mg–1.4% Ni–1.1% Fe
Alloy Produced via Casting in an Electromagnetic Crystallizer |
(Rus)
|
|
Belov N., Timofeev V., Cherkasov S., Motkov M., Musin A.
|
| 卷 124, 编号 4 (2023) |
Predicting the Concentration Dependence of the Surface Tension
of Ternary Systems |
(Rus)
|
|
Dadashev R., Elimkhanov D., Khazbulatov Z.
|
| 卷 124, 编号 3 (2023) |
A Study of the Neutron Absorbing Properties of Al + B4C
and Al + B Coatings Formed by Cold Gas-Dynamic Spraying |
(Rus)
|
|
Kosarev V., Klinkov S., Shikalov V., Chesnokov A.
|
| 卷 124, 编号 3 (2023) |
Simulation of Rolling in a Magnetostriction Fe–Ga Alloy |
(Rus)
|
|
Milyutin V., Nepriakhin S., Gervasyeva I.
|
| 卷 124, 编号 3 (2023) |
The Influence of Production Technology on the Structure
and Mechanical Properties of Niobium–Silicon–Aluminum Alloys |
(Rus)
|
|
Sapegina I., Lubnin A., Ladyanov V.
|
| 卷 124, 编号 2 (2023) |
Comparative Сharacteristics of the Structure
and Functional Properties of Coatings Formed on Aluminum Alloys
2ххх and 7ххх Series by the Method of Plasma Electrolytic Oxidation |
(Rus)
|
|
Letyagin N., Sokorev A., Kokarev V., Shatrov A., Tsydenov A., Finogeev A., Musin A., Petrzhik M.
|
| 1 - 59 的 59 信息 |
|
